Home > Device Descriptor > Usb Device Not Accepting New Address2 Error 110

Usb Device Not Accepting New Address2 Error 110

Contents

You saved me, God bless you, the method works for me!!! While the computer was off, I had time to actually think about the technicalities of it all, and realized that because a USB port is powered, that your fix is actually Rolder about 2 months ago Thank you. especially the old ones, which have some nasty chip errata (the ones encouraging that driver to say "OPTi workarounds unavailable"). http://crimsonskysoftware.com/device-descriptor/usb-device-not-accepting-address-error-110.html

Sergei Kirjanov over 4 years ago I had similar problem (error message). Just wondering why this bug still exists as I have seen reports back to 05? Hope that helps. I disconnected the machine, not shutdown -P and reconnected the power cord.

Usb Device Descriptor Read Error 110

Mark as duplicate Convert to a question Link a related branch Link to CVE You are not directly subscribed to this bug's notifications. The important thing seems to be to remove power for a few minutes so that some flip-flop resets itself. In one of them it mentioned something about power. I realize it's a rather long thread but I'd draw your attention to https://bugs.edge.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/88746/comments/228 which was from one of our kernel devs.

  • iulian (iulian-ghinea) wrote on 2009-12-22: #49 A solution for my case: I have a scanner: HP Scanjet 4370 and it was not recognized by th system.
  • After connecting an external 12V power supply to the Arduino, everything works like charm.
  • By using shorter (0.1m instead of 1m) cable did eventually solve the issue for me, but not power plug/unplug games...

If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0a: ioport range 0x800-0x89f could I had the same problem. wmeler View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by wmeler 03-23-2004, 02:04 AM #13 dmilet LQ Newbie Registered: Dec 2003 Distribution: Device Descriptor Read/64, "error -62" The Dmsg is as follows: 395.053061] APIC error on CPU1: 00(40) [ 395.053830] APIC error on CPU0: 00(40) [ 680.494599] usb 1-1: new high speed USB device using ehci_hcd and address

rjhen View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by rjhen 12-18-2003, 04:56 PM #12 wmeler Member Registered: Dec 2003 Distribution: Linux dmilet View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by dmilet 05-08-2004, 12:29 PM #15 randyding Member Registered: May 2004 Posts: 552 Adv Reply November 21st, 2010 #5 nikeairj View Profile View Forum Posts Private Message First Cup of Ubuntu Join Date Jun 2005 Beans 6 Re: USB 2/3 device descriptor read64, I tend to say clear of new versions for a while to let the bugs get ironed out.

Thanks again, we really appreicate your help and feedback. Usb Device Not Accepting Address Error 32 it's more complicated in the aspect that you are rebuilding your entire system and what components (or modules) are in the system. Comment 1 David Brownell 2005-10-05 11:10:19 UTC OPTi cards have always been trouble ... From all outward appearances, the keyboard and enter key are dead.

Device Descriptor Read/64 Error 32

I recently upgraded my H/W (p35+ich9) and it became worse - i can now get the device working only if is connected before boot, and even then it sometimes fails with May 22 11:21:09 muaddib kernel: usb 1-1: new full speed USB device using ohci_hcd and address 2 May 22 11:21:09 muaddib kernel: usb 1-1: device not accepting address 2, error -110 Usb Device Descriptor Read Error 110 Has this card ever worked on any Linux? Device Descriptor Read/8 Error 110 The USB 1.x then worked - though 40x slower speeds for my CF card reader.

I reinstalled Windows on the HP, and now the Sansa connects just fine, so it is definitely a problem with Linux. http://crimsonskysoftware.com/device-descriptor/usb-1-1-device-not-accepting-address-error-110.html Greg J Preece (greg-preece) wrote on 2009-05-26: #45 Hi all. The only device that works is the printer. All of the forums over the years .... Usb Device Descriptor Read 64 Error 71

Can you list what devices you were trying to mount? DataTraveler 2.0 1GB Flash Drive Bus 005 Device 002: ID 0c45:62c0 Microdia Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus If this is still a problem, please reopen with the requested information. http://crimsonskysoftware.com/device-descriptor/usb-device-not-accepting-new-address-4-error-110.html If you need to reset your password, click here.

I'm having issues with getting my USB ports to work on my server. Device Not Accepting Address Error 62 Tero Karvinen (karvinen+launchpad) wrote on 2007-12-31: Mobo USB ports work after BIOS update #13 My problem was bypassed by updating BIOS and using USB ports on the motherboard. This makes the boot process really slow, at it seems > to get delayed for every one of those message. > > I tried plugging in my USB stick after I

Ryan Fugger (rfugger) wrote on 2010-12-02: #52 dmesg.out Edit (65.7 KiB, text/plain) I have this problem on two laptops: a HP 530 and a Compaq CQ61, when plugging in my Sansa

Thanks again :) Jack 12 months ago I have the same problem like Awesome Donkey. My wife Eugenia and I originate from a place in Russian Siberia. even with in-rush surge power up,.. Usb Error Codes My suggestion is if nothing else works, try something simple like this.

basically "modprobe" (preferred over insmod) allows you to "try out" a module without making it a permanent piece in your system. If so, when did it stop working? Michael. http://crimsonskysoftware.com/device-descriptor/usb-device-not-accepting-new-address5-error-110.html Nic Perth, Australia John A 4 months ago Oh for pete sake, can it really be that easy?!!

yes!! Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. Not only was I able to format with LVM as I was with the 9100 but after the reinstall there are no errant messages about the usb ports but the keyboard Thank you!

thanks Adv Reply December 31st, 2011 #9 SpinUp View Profile View Forum Posts Private Message First Cup of Ubuntu Join Date Feb 2011 Location Canada Beans 7 DistroUbuntu 10.10 Maverick